Apr 26, 2013

Having Fun in Morocco...Wish You Were Here!

Although we had fun, we weren't really in Morocco!  It was that time of year again when our church congregation "cruises" to some exotic place.  We have been to the Caribbean, south of the border, Italy, the Orient, and even got shipwrecked on Gilligan's Island.  Last year, we took a Mississippi riverboat cruise to New Orleans. This year we were fortunate to visit the beautiful country of Morocco.  The food was wonderful...Moroccan chicken pie, couscous, green salad with feta and other wonderful flavors, figs, fruit, bread, and orange cake for dessert.  The entertainment was first class!  We enjoyed a snake charmer, belly dancer, and fortune teller.  Of course, the snake was stuffed and came to life thanks to fishing line.  He even carried on a funny conversation with his charmer.  The fortune teller handed out fortunes that were actually scripture verses.  And the brave (and modest) belly dancers were three of the leaders of our congregation...good sports!   It was a fun evening filled with good food, good friends, and fun!

Now, on to the decorations which were fashioned from many secondhand treasures!  If you are familiar with my past activities, then you will know how much I LOVE cast off sheets from hotels.  For this party I was able to use "stone wall" stenciled sheets and plain-dyed sheets from previous activities.  I did, however, do an ombre dye on nine sheets to create curtains for this party.  I used yellow, orange, and wine to create a striped effect.  You can visit this tutorial to see how I did the ombre effect.


I cut decorative tops from black foam core board purchased at the dollar store.  Using my Cricut, I cut a stencil and used it to dress up the pieces with metallic paint.  I used a strip of the foam core to thread it through the wide hem of the sheet.  This allowed the curtain to be gathered at the top and then pinned to the walls (our textile covered walls act like big bulletin boards!)  The foam core strip (which I used because it was leftover from cutting the tops, and cheap!) did have a tendency to break, so be careful, or use a dowel or wooden slat.  I purchased gold curtain tie-backs at a thrift store for 50¢ a piece.


The food table was first covered in plain-dyed sheets, then layered with two burgandy table clothes purchased at a thrift store for $2 a piece.  The turquoise fabric on the wall is a very long window scarf picked up for $4.  A votive candle holder creates a focal point for the scarf to hang from.  A roll of gold metallic mesh adds some sparkle under the wicker trays and place mats.


Lamps were added to provide some much needed light.


I usually like to hang icycle lights from the edge of the table (under the table skirting), but I didn't think they would show up much since the burgandy table clothes were so thick.  So I just placed them on the floor under the table and they created a nice glow through the dyed sheets.


Originally, my mind envisioned the fortune teller corner as a tented area.  But, time restraints dictated an alternate plan.  I was happy with the end result, nonetheless.  Thrifted curtain valances, fabric, velvet throws, and dyed sheets were used to create this scene.  Throw rugs helped to cover the gym floor and the cord to the table lamp!


The table was covered in a beautiful vintage, hand painted velvet cloth.  The light was thrifted for a couple of dollars.


A few years back, I helped to decorate for a homecoming dance at the local high school.  They wanted an Arabian nights theme.  I cut these columns from masonite, painted, and stenciled them with gold metallic spray paint.  The bottom stencil was actually a "wrought iron" looking door mat.  I just laid it over the column and sprayed it.  Of course, not wanting to waste anything, when I was done stenciling, I sprayed the mat black again and still use it at my back door!  This was our photo-op corner.


A while ago, our black stage curtains unfortunately "disappeared," so a backdrop was needed to dress up the stage.  The columns and stenciled sheets came in handy to complete the job.  Of course, there is only so much you can do when you're working around basketball hoops and accordion curtains!


My trusty gazebo made an appearance again.  (You can see at my son's wedding here, and my daughter's wedding here.)  I found some cute colored lights at a grocery outlet store that fit in with the moroccan theme.  The light in the middle was re-wired by my husband to plug into an outlet.  I painted the glass panels with transparent paint in moroccan colors, although it doesn't show up in the photos. 

 

I picked up three long window scarves for $3 each and created a billowed ceiling in the gazebo.  The rug is actually a vintage bedspread in a bright orange and yellow design with tassels.


One of my favorite projects for this party was the Moroccan lanterns I put together from various thrift store finds.  Each lantern sat on top of a battery-operated LED light.  I made seventeen lanterns for this party, all unique and different from each other.  For a break down of the various parts I used for some of the lanterns, you can visit this tutorial.



 

I even thrifted some great costumes.  My tunic and matching pants were only $2 for the set!!  And, my husband's brightly colored tunic was just $3.


I'm not sure, this may have been more oriental than moroccan, but I couldn't pass it up for the price!




 I like to link to these great parties!



Mar 31, 2013

All Zipped Up!

A while back I picked up this maternity jumper at a thrift shop for a couple of bucks.  Now, let me just say that this grandma is no way in need of maternity clothes!  The only babies I am waiting for now are more grandbabies (hint, hint to my married kids!)  But, I did like the black and white fabric and knew I could take in the sides.  


The first thing I did was to cut off the ties.  At first I thought I would add an invisible zipper to the side seam so I could still get the dress on and off.  But, it was late at night and no invisible zipper on hand.  I did, however have a long, black separating zipper in my stash.  So, plan B...an exposed zipper down the back.  To allow for this, I made one cut all the way up the center of the back.  I then serged the edges.  


Next, I just laid the zipper on top of the serged edges and topstitched in place, folding and stitching the top of the zipper to the inside.  The zipper wasn't long enough to reach the bottom of the hem, but this just allowed for a vent in the back...nice how things have a way of working out!  I just turned under the edges of the vent and topstitched in place.



The jumper next went onto my dress form to pin to size.  Then it was just a matter of stitching up the new side seams, making sure to match up the lines of the fabric.


I didn't care much for the look at the bottom of the zipper so I added a small placket with two decorative buttons.  All in all, pretty simple!






I like to link to these great parties!

Mar 18, 2013

The "Tattooed" Denim Jacket


I may not have the urge to tattoo my body, but I did get the urge to tattoo a jacket!  I love the intricate design of some of the henna tattoos and thought they would would look great as embellishments on a denim jacket.  I started with this white denim jacket that I picked up at a thrift store for a few dollars.  Originally, it had eyelet lace trim around the collar, pockets, and cuffs.  I didn't care much for it, so I cut it away! 


I then spent some time...quite a bit of time...drawing designs on the jacket with an ultra fine point sharpie marker.


After I was satisfied with the designs, I used Elmer's washable clear glue and filled in some of the design elements.  I filled an empty paint tube with glue so that I could have a smaller opening and more control over the gluing process.  I let the glue dry thoroughly.  The dried glue works almost like magic in the next step, which is dyeing the jacket. 


I used Rit Denim Blue liquid dye.  I was going for an ombre look, so I started at the bottom of the jacket and worked my way up to get the desired ombre effect.  As you can see in the picture below, I made a makeshift rack to hang my jacket from.  Every 5 minutes I lowered the jacket to the next level, into the dye.  When I got to the level of the inked design, I placed the whole jacket in the dye for a couple of minutes, then placed it in the sink to rinse. 


 The dried glue resists most of the dye, leaving the treated areas lighter.  The glue is washable and disappears in the wash.








 Whenever you dye something, you never know exactly how it will turn out.  With this project, the thread remained white.  I really like the effect, though, since it ties in so nicely with the white in the inked designs!

 

This technique was a bit time consuming, but I'm really happy with the results. 
A few tips:

•Make sure you use Elmer's washable clear glue and let it dry completely.
•I didn't get my jacket wet before dyeing (which is usually recommended for a more consistent result), I didn't want to risk washing away the dried glue and, therefore, ruining the effect.
•Be sure you use a permanent ink marker.  

Update:  Louise in SW Saskatchewan had this useful information to add to the process:
"The thread stayed white because it was probably polyester or a polycotton blend instead of 100% cotton. I am a professional hand dyer and have found out about this.  If you use Elmer's blue School Gel you can get finer lines as it holds it's shape better than the Clear Gel which tends to spread more. I use the Blue Gel for a particular technique and we tried the clear gel to compare and discovered its spreading tendencies."

I was aware of the reason why the thread didn't take the dye, but the advantage of the blue glue was news to me!!

Good luck!

I like to link to these great parties!

Featured on:
Sugar Bee Crafts
The Busy Bee's
Threading My Way
Crafted
A Girl and A Glue Gun

Also featured in Fall 2013 Altered Couture magazine!



Mar 10, 2013

Polo, anyone?


This latest refashion began life as an 4XL tall men's polo shirt.  I was drawn to the color, stripes, $2 price tag, and most importantly...amount of fabric to work with!  I cut off the collar and sleeves, then placed it on my dress form backwards.  I didn't want it to necessarily look like a reformed polo shirt, so I placed the button placket in the back.  I switched out the buttons for two black ones found in my stash.


I pinned the sides to the right width and trimmed away the excess.  There was so much fabric left from the sides that, after cutting apart the original side seam stitching,  I was able to make four strips with vertical stripes (two for the front and two for the back.)  Before sewing up the side seams, I made two horizontal cuts along the bottom of the shirt front and back (one at about 5" from the bottom hem, and another at about 8").  I retained the original hem of the shirt for my new dress.  I then inset my vertical-striped strips, along with some black knit piping in the front and back of the dress.   Next, I cut a long strip of black knit and inset it into the side seams.  This served two purposes, one to give the dress more interest, and two, I didn't have to be so precise when matching the front and back stripes and piping!  I finished it off with some black ribbing around the neck and arms. 


After it was finished, I felt the armholes were bigger than I wanted, so a made a little pleat at the top of each sleeve and hand stitched it into place.


It was a windy day for taking pictures, but check out the great leather coat I snagged for $2.00 at a local thrift shop!


Because of the stretch knit, this dress is super comfortable!  At $2.00, it was also very affordable!  I think my favorite part, though, is that the two vertical striped insets disguises the fact that I was trying to lengthen a t-shirt into a dress.  It feels like it was designed that way!

I like to link to these great parties!

Featured on:




Feb 21, 2013

Corduroy Shirt Dress and Sweater Bag

After spending weeks hanging on my dress form, half done, I finally finished my latest refashion.  This dress was created from an XXL men's shirt and L men's sweater.  I spotted the shirt at the thrift shop and pictured it right away as a dress with a rolled sweater collar.  I patiently waited for it to go on sale.  In fact, in my waiting, I thought I had missed the opportunity when I went back and couldn't find it, but no worries, it was just hanging in a different spot.  So I snatched it up!


This is what I started with...



I used the lower half of the sleeves for my new 3/4 sleeves, retaining the cuff detail.  With the excess fabric from the upper part of the sleeves, I was able to lengthen the shirt to a more suitable dress length.


I left the shirt's collar band in place, but cut off the actual collar.  I used a portion of the removed collar to create a triangular extension so that one end of my new rolled collar could tuck neatly under the other end.  In fact, since the original collar was a button-down collar, I was able to utilize the existing buttonhole at the point of the collar to keep my new collar in place.


I added elastic to the waist so that it would cinch up evenly.


I had plenty of the sweater leftover and thought it would be fun to make a purse.  So back to the thrift shop for the lining and details.  I found an extra long belt with studs that I thought would be fun.  And, a pair of brown corduroy pants would be perfect for the lining and trim.



I love the corduroy plaid fabric!  The dress is comfortable and the purse is roomy.  Besides from a broken needle while sewing the purse, I think it was a success!

Shirt.....$3.00
Sweater.....$2.00
Belt.....$2.00
Pants.....$2.50

Total cost for dress and purse.....$9.50!

For a tutorial on the dress, click here!
For a tutorial on the purse, click here!

I like to link to these great parties!

Featured on:



Feb 9, 2013

Dollar Store Crafting-Baking Cup Bunting


Here's a simple, but cute bunting you can make with items purchased at the Dollar Store.  All you need are the following:

1 pkg. regular-sized baking cups
1 pkg. mini baking cups
glue stick
scissors
iron
sewing machine

Total cost:  $2.00
(with cupcake picks and 82 mini baking cups leftover for another project!)




Step #1 - Iron the baking cups flat.




Step #2 - Cut the baking cups in half.




Step #3 - Glue the mini baking cups to the center of the regular baking cups.




Step #4 - Stagger the baking cups as you stitch them down the center with the sewing machine.




Step #5 - Display!





Just a note...this bunting doesn't hang like your traditional bunting (with a gentle curve) so it's best laying on top of the mantle, or table, or attached across the front edge.  A couple of rows of these would look rather cute as a table runner for your Valentine's dinner!  Of course, with each holiday the Dollar Store has baking cups to match.  So these could be made for other holidays as well!

I like to link to these great parties!